Notes: The feeding capacity and accuracy will be affected by different materials.
PRODUCT
-
Melt pump
- ·Gear melt pump for high viscosity medium
- ·Plastic melt pump for extruder
- ·Melt pump for reaction kettle
- ·Pipeline gear pump for polymer
- ·Polymer melt pump for reaction kettle
- ·Gear pump for rubber extruder
- ·High temperature and high pressure melt pump
- ·Pressurized melt pump for extruder
- ·PLC Control System for extruder
- ·PID Control System for extrusion
- ·Twin screw loss in weight metering feeder
- ·Single screw loss in weight feeder
- ·Micro loss in weight metering feeder
- ·Multi-component loss in weight feeder
- ·Volume type feeding machine
- ·Liquid loss in weight feeder
- ·Double piston double screen cavities screen changer
- ·Double piston four screen cavities backflash screen changer
- ·Single piston double screen cavities screen changer
- ·Single plate double screen cavities screen changer
- ·Double piston four screen cavities screen changer
- ·Automatic mesh belt continuous screen changer
- ·Double plate hydraulic screen changer
- ·Manual control screen changer
♣ Feeding system
▓※ > PRODUCT > Feeding system >
Twin screw loss in weight metering feeder
Author:Batte Time:2016-02-02
Application:
In the extrusion processing, it is common to add many material (such as color, flame retardant, glass fiber and so on) into extruder. In the process of continuous extrusion production, various material should be added to extruder continuously synchronized. And the adding speed of these materials should depend on corresponding formula, so metering feeder is necessary to control the adding speed. And one metering feeder control one material.
Loss-in-weigh feeders is suitable for plastic granules, powder, calcium carbonate, talcum powder, resin membrane powder, flour, starch and so on. Different material use different feeders.
Characteristics:
1. Generous and beautiful appearance: comparing with traditional feeders, Batte dose more improvements on feeders’ appearance.
2. Small in size: easy to move, more suitable for changing and improving production process.
3. Low noise: comparing with other feeders, noise of Batte feeders is up to perfect.
4. Easy to clean and maintain: it’s easy to maintain in operation, meanwhile, very short maintenance time. Especially the control system, adopting the leading software and hardware, are nearly free-maintenance and long-service life.
5. High feeding accuracy: Batte adds self-detection function when designing its feeders for more accuracy, it allows to detect attritions of parts and frequency variation timely, then revise them. So the feeder will not affect the feeding precision because a little change of the machine.
Parameters:
Type |
Screw specification |
Capacity (L/H) |
Driving power (kw) |
Hopper (L) (optional) |
Feeding accuracy |
BAT-MF-TS28 | 28 | 10-200 | 1.1 | 40-80 | ±0.2% |
BAT-MF-TS38 | 38 | 30-400 | 1.1 | 40-100 | ±0.2% |
BAT-MF-TS46 | 46 | 50-800 | 1.5 | 40-120 | ±0.2% |
BAT-MF-TS64 | 64 | 60-1200 | 2.2 | 40-150 | ±0.2% |
Email to this supplier