PRODUCT
-
Melt pump
- ·Gear melt pump for high viscosity medium
- ·Plastic melt pump for extruder
- ·Melt pump for reaction kettle
- ·Pipeline gear pump for polymer
- ·Polymer melt pump for reaction kettle
- ·Gear pump for rubber extruder
- ·High temperature and high pressure melt pump
- ·Pressurized melt pump for extruder
- ·PLC Control System for extruder
- ·PID Control System for extrusion
- ·Twin screw loss in weight metering feeder
- ·Single screw loss in weight feeder
- ·Micro loss in weight metering feeder
- ·Multi-component loss in weight feeder
- ·Volume type feeding machine
- ·Liquid loss in weight feeder
- ·Double piston double screen cavities screen changer
- ·Double piston four screen cavities backflash screen changer
- ·Single piston double screen cavities screen changer
- ·Single plate double screen cavities screen changer
- ·Double piston four screen cavities screen changer
- ·Automatic mesh belt continuous screen changer
- ·Double plate hydraulic screen changer
- ·Manual control screen changer
Melt pump for reaction kettle
Author:Batte Time:2016-02-02
Introduction of Melt pump for reaction kettle
Melt pump for reaction kettle is mainly used for transporting medium or high viscosity medium out of the vacuum reaction kettle. On basis of large suction inlet flange design, the high viscosity medium is able to absorb inside under vacuum conditions. This series of reaction kettle pump is primarily applicable for ABS, PS, PET, PC, SAN, PP, PE Bioploymers etc.
Technical Parameter of Reaction kettle pump
◆ Melt Pump Body: stainless steel, carbon steel, hastelloy, monel
◆ Gear: tool steel, nitrided steel, special material and wear-resistant coating
◆ Tooth profile: Straight tooth, Helical tooth, Herringbone tooth
◆ Sliding Bearing: tool steel, Ti-Ta alloy, silver-nickel, special material and wear-resistant coating
◆ Shaft Sealing: mechanical seal, Screw sealing+Packing seal, flushing fluid combined sealing
◆ Heating System: Conduction oil heating, Biphenyl gas
Operating Parameter of Melt pump for reaction kettle
◆ Theory: Positive Displacement Gear Pump
◆ Structure: Gear Pump
◆ Usage: Plastic, Rubber Pump and Fiber
◆ Power: Electric or Oil
◆ Fuel: No Need
◆ Pressure: High Pressure
◆ Volume Range: 0.5CC - 12000CC
◆ Viscosity: ≤40000 Pas
◆ Working Temperature: ≤400°C(750°F)
◆Cleaning Temperature: ≤450°C(850°F)
◆ Inlet Pressure: Vacuum--1.5MPa
◆ Outlet Pressure: 40Mpa
Features of reaction kettle pump
◆ Stabilizing outlet pressure;
◆ Improving the products quality;
◆ Increasing the extrusion output;
◆ Reducing unit energy consumption;
◆ Prolonging the service time of extruder.
PRE:NOTHING !