PRODUCT
-
Melt pump
- ·Gear melt pump for high viscosity medium
- ·Plastic melt pump for extruder
- ·Melt pump for reaction kettle
- ·Pipeline gear pump for polymer
- ·Polymer melt pump for reaction kettle
- ·Gear pump for rubber extruder
- ·High temperature and high pressure melt pump
- ·Pressurized melt pump for extruder
- ·PLC Control System for extruder
- ·PID Control System for extrusion
- ·Twin screw loss in weight metering feeder
- ·Single screw loss in weight feeder
- ·Micro loss in weight metering feeder
- ·Multi-component loss in weight feeder
- ·Volume type feeding machine
- ·Liquid loss in weight feeder
- ·Double piston double screen cavities screen changer
- ·Double piston four screen cavities backflash screen changer
- ·Single piston double screen cavities screen changer
- ·Single plate double screen cavities screen changer
- ·Double piston four screen cavities screen changer
- ·Automatic mesh belt continuous screen changer
- ·Double plate hydraulic screen changer
- ·Manual control screen changer
Gear melt pump for high viscosity medium
Author:Batte Time:2016-02-02
Introduction of Standard melt pump
ZB-B series standard melt pump is mainly used for extruder or pressurization, stabilizing flow and transportation of medium or high viscosity polymer. This series of gear melt pump adopts electric heating, and appliers to PS, PP, PET, PVC, PC, PMMA, PA, ABS, P-LLD, etc.
Technical Parameter of gear melt pump
◆Melt geat pump body: high temperature tool steel, chromium-nickel steel
◆Gear: high temperature tool steel, nitrided steel
◆Tooth profile: straight tooth, helical tooth, herringbone tooth
◆Sliding Bearing: high temperature tool steel
◆Shaft Sealing: screw sealing, packing seal, screw sealing+packing seal, other combined sealing
◆Heating System: Electrical Heating
Operating Parameter of melt gear pump
◆Theory: Positive Displacement Gear Pump
◆Structure: Gear Pump
◆Usage: Plastic, Rubber Pump and Fiber
◆Power: Electric or Oil
◆Fuel: No Need
◆Pressure: High Pressure
◆Volume Range: 0.5CC - 3200CC
◆Viscosity: ≤40000 Pas
◆Working Temperature: ≤400°C (750°F)
◆Cleaning Temperature: ≤450°C (850°F)
◆Outlet Pressure: 40MPa(6000psi)
◆Differential Pressure: ≤25Mpa
Application of melt pump
◆Polymer extrusion molding, such as granulation, film, pipe, plate, sheet, etc;
◆High-viscosity materials such as PC, PMMA, ABS, HIPS, PET, PVB, PS, PP, PA, PE, PVA .etc;
◆Rubber, asphalt, paint, adhesives, coatings, lubricants, polyalcohol, non-particulate impurities;
◆Polyester for cotton-fiber, polypropylene and other chemical fiber melt.